Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Fillmore
Chimney sweeping in Fillmore typically costs $189 – $329, and in most of the city’s older homes the real work is uncovering what years of disuse have left inside the flue. We’re Chimney Sweep Camarillo, and we work throughout Fillmore with crews who know the difference between a citrus-era brick chimney and a modern prefab flue. If you live near Central Avenue, up toward the foothills off Goodenough Road, or in any of the neighborhoods between Highway 126 and the railroad tracks, we can get to you fast. Call (833) 589-9263. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Fillmore Homeowners Call Chimney Sweep Camarillo for Chimney Sweep
Fred Huerta built this company on a rule that matters more in Fillmore than almost anywhere else we work: we identify what’s wrong before we recommend what to fix. Older homes here don’t get routine sweeps the way fireplaces do in colder climates. That means our chimney sweep team walks into flues that haven’t been opened in a decade, and often find problems a brush alone won’t solve. We show you the camera footage before quoting any repair. No homeowner in Fillmore should pay for a liner replacement on someone’s word alone.
Fillmore’s housing stock leans heavily on pre-1950 bungalows and early ranch homes. Those brick chimneys were built well, but many have never been relined, and clay tile flues crack as they age. We carry the professional-grade materials to actually fix what we find: DuraFlex for full liner replacement, HeatShield for resurfacing that buys a chimney another decade or two. That’s not a hardware-store fix. That’s contractor-spec work, done by one specialist crew.
Our customers across the Santa Clara River Valley know us for showing up when we say we will. In Fillmore specifically, our response is quick because we’re based just down the road in Camarillo, and we keep our route through Moorpark and Santa Paula simple. You call, we answer. We dispatch the same day for sweeps and inspections. And the estimate is always free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning in Fillmore
Chimney Cleaning in Fillmore is usually a two-hour job that costs between $189 and $289 for a standard single-flue fireplace, and it starts with what we can see before we ever run a brush up the stack. Fillmore’s older downtown blocks and the streets around Sespe Avenue are full of brick chimneys that have sat cold for months at a time. In those flues we routinely pull out soot dauber wasp nests, bird nests, and layer upon layer of creosote that hardened during long idle periods. A cleaning here is less about knocking off a little dust and more about reviving neglected historic masonry.
We run a camera up before and after. The before footage shows you what’s actually in there, and the after footage shows you it’s clean. If you’ve never seen the inside of your own flue, this matters. You should know what you’re paying for.
Creosote and Soot Removal
Fillmore’s mild winters mean fires burn hot and fast when they finally happen, usually from December through February. That rapid heating can bake existing creosote into a hard, shiny glaze that a standard wire brush won’t remove. We use the right mechanical and chemical removal methods for the creosote stage we find. Third-degree creosote is combustible at normal fireplace temperatures, and it’s common in chimneys that sat unused for years before a family moved in.
Annual Sweep and Level 1 Inspection
An annual sweep in Fillmore runs about $219 and includes a basic Level 1 inspection of the accessible parts of the chimney. We check the damper, the firebox, the flue liner, and the exterior cap. For homes that burn every weekend during the season, this once-a-year rhythm is enough. For homes that haven’t been used in five-plus years, we’d recommend a Level 2 inspection alongside the sweep, which costs $299 – $449 depending on the chimney height and condition.
Fireplace Cleaning in Fillmore
Fireplace Cleaning in Fillmore includes everything from vacuuming out the firebox to cleaning the damper assembly and glass doors on gas and wood-burning units. A typical fireplace cleaning here runs $189 – $259 as a standalone service, or it’s bundled with the chimney sweep for about $329 total. The firebox is where Fillmore’s dry summer air works against you: fine dust and ash settle into mortar joints, then get blown into the living room the first time you light a fire in November.
For gas fireplaces, we clean the burner ports, check the thermocouple and pilot assembly, and vacuum out the ceramic logs. Fillmore’s newer tract developments off River Street and near the high school use mostly prefab gas units, and those need a gentler touch than the old brick fireboxes downtown.

Masonry Firebox Care
Original brick fireboxes in Fillmore’s citrus-era homes were built with lime mortar that softens with age. We inspect the mortar joints for crumbling and repoint small sections when needed so the firebox keeps its structure. We don’t recommend a full rebuild unless the camera and a physical inspection show it’s genuinely failing.
Precast and Metal Fireboxes
Newer Fillmore homes use factory-built metal fireboxes with refractory panels. These are efficient but sensitive to the wrong cleaning technique. We use brushes sized for prefab units and never run a masonry chimney brush up a metal flue, which can scratch the liner and void the manufacturer’s warranty.
Trusted Brands We Service in Fillmore
We work on chimneys and vents built with components from Famco, Copperfield, and Olympia Chimney, among others. We don’t stock hardware-store substitutes. When a Fillmore chimney needs a new cap or a section of venting replaced, the part going on your roof is the same professional-grade component we’d install anywhere in Ventura County. For liner work, we install DuraFlex flexible stainless systems and use HeatShield for resurfacing existing clay tile liners. Because we carry these materials, most repairs can be quoted and scheduled the same week you call, without waiting on a supply house shipment.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Fillmore Homes
- Mud dauber and bird nests in idle flues. Fillmore’s long, warm seasons mean many fireplaces go untouched from March through November. Wasps and birds move in. We pull nests out on a regular basis, especially in older downtown neighborhoods near the citrus packing houses.
- Third-degree creosote from years of uneven burning. When a chimney sits cold for months and then gets fired up hard, old creosote bakes into a glaze that brushes can’t remove. We identify it with the camera and treat it with the right removal method before it becomes a fire hazard.
- Cracked clay tile liners in pre-1950 chimneys. Most original Fillmore chimneys were built with clay tile liners. After seventy-plus years, those tiles crack. A Level 2 inspection catches this before heat and moisture push through the cracks into the surrounding masonry.
- Spalling mortar and damaged crowns. Fillmore’s occasional winter rain soaks into old mortar joints and chimney crowns, and the summer heat bakes it back out. That cycle slowly deteriorates the masonry at the top of the stack. We see this constantly on homes along the older grid streets near downtown.
Pricing for Chimney Sweep in Fillmore, CA
A standard chimney sweep in Fillmore runs $189 – $289. Fireplace cleaning alone is typically $189 – $259. If you bundle both, expect around $329. A Level 2 inspection, which we recommend for any chimney that hasn’t been used in more than two years or that shows visible exterior wear, runs $299 – $449. Liner replacement or HeatShield resurfacing is quoted per job after a camera inspection, and we walk you through the footage before any quote is finalized. The written estimate sets the final price. Call (833) 589-9263 for a free estimate. We answer 24/7.
We Also Serve Cities Near Fillmore
Our crews regularly drive out to Fillmore from Camarillo and take the same routes through Moorpark, Santa Paula, Simi Valley, and Santa Rosa Valley. If you’re on the edge of town or just outside the city limits, we still cover the whole Santa Clara River Valley. One call handles the trip, the inspection, and the sweep.
Serving Fillmore, CA – Our Local Coverage Area
We serve Fillmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Fillmore
Yes, and in Fillmore specifically you need it more than a homeowner in a colder climate would. Long idle periods let birds and wasps build nests, let creosote harden, and let mortar quietly absorb moisture. The first fire after years of disuse can ignite that creosote or crack the masonry. We recommend a Level 2 inspection plus a sweep for any chimney that’s been dormant for more than two years. Call (833) 589-9263 to schedule.
First-degree creosote is a light, dusty soot that brushes off easily. Third-degree creosote is a hard, tar-like glaze that forms when a chimney is fired intermittently and the old creosote bakes under high heat. Fillmore’s pattern of long idle months followed by hot December fires creates exactly those conditions. Third-degree creosote is a leading cause of chimney fires, and it usually requires chemical treatment or mechanical removal beyond a standard sweep.
Yes, and we insist on it. Every inspection includes camera footage we show you on the spot. We sweep, we run the camera again, and you see the before and after for yourself. We will not recommend a liner replacement, crown repair, or any structural work without camera evidence you can watch with us. That’s the whole point of our approach: repair first, replace only when necessary.
Yes. Prefabricated metal chimneys need smaller, softer brush heads specifically sized for factory-built flues. Running a masonry brush up a metal flue can scratch the inner liner and void the manufacturer’s warranty. Our crews carry both types of equipment and check the system type before they start. Newer Fillmore tracts off River Street and A Street mostly use these prefab systems, and we service them regularly.
Don’t ignore it, but don’t panic either. Spalling means moisture has gotten into the masonry and is slowly breaking it apart. In Fillmore’s climate, the wet winter to hot summer cycle accelerates this. Call us at (833) 589-9263. We’ll run a camera up the flue, inspect the crown and the top few feet of masonry, and show you exactly what’s failing. Some spalling is cosmetic; some threatens the structure. Either way, you’ll see the evidence before any repair is quoted.
Written by Fred Huerta, Owner at Chimney Sweep Camarillo, serving Fillmore since 2015.