Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Fillmore, CA
Chimney repair in Fillmore usually means working on original brick flues built during the citrus boom, and those flues behave differently than anything in newer Ventura County tract housing. Decades of hot, dry summers followed by sudden December use can crack mortar and shift bricks in ways that a routine sweep won’t fix. We handle the repair work itself, from crown rebuilds to full liner installation, so you’re not handed off to another company mid-job. Call (833) 589-9263 when a fireplace stops drawing right or you see brick spalling on the chimney face.
Why Fillmore Homes Are Different
Fillmore’s older downtown blocks and the streets around Central Avenue hold a lot of pre-1950 bungalows with original brick chimneys. These flues were built for a different era. Many have never been relined, and because Fillmore winters are mild, fireplaces in these houses sit cold for eight or nine months at a stretch. That idle time is exactly when creosote hardens, animals move in, and hairline cracks in old mortar open up without anyone noticing. Then December arrives and the first real fire sends a burst of heat through brick and clay tile that hasn’t flexed in months. That’s when a small problem becomes a visible one, and often an expensive one.
The newer tract development on Fillmore’s east edge uses prefabricated metal fireboxes with shorter flues. Those systems need different brush types and a different inspection approach than a 1920s brick chimney. A crew that only knows one style of fireplace is going to misdiagnose the other, which is why we treat Fillmore as a two-housing-town: old masonry downtown, factory-built systems on the rim. The repair questions are different, the cleaning methods are different, and the safety issues are different too.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Fillmore Services
Most calls we receive from Fillmore homeowners come down to two things: a chimney that hasn’t been serviced in years, or a dryer vent that’s quietly packed with lint inside the wall. Both are fire risks, and both should be looked at before the season forces the issue.
Chimney Sweep in Fillmore
An annual Chimney Sweep in Fillmore is the fastest way to know what’s happening inside a flue that’s been idle for months. In Fillmore’s older homes, we commonly find the remains of bird nests and soot dauber wasp nests that built up during the long off-season. A sweep clears the creosote and debris, and the camera inspection that comes with it shows whether the flue is still sound or whether the real issue is structural. That report is yours to keep and look at before anyone recommends spending money.
Dryer Vent Cleaning in Fillmore
Dryer vents in Fillmore’s ranch-style homes often run long distances from the laundry room to an exterior wall, and every extra foot of pipe is another place lint can collect. Dryer Vent Cleaning in Fillmore clears that entire run and restores airflow. A vent that’s been neglected for years doesn’t just dry clothes slower; it builds heat around an ignition source that’s running for an hour at a time. This is one of those jobs that looks simple from the outside and saves far more than it costs once we show you the photo from inside the pipe.
Chimney Repair in Fillmore
Repair work in Fillmore splits into two worlds. Downtown and the older neighborhoods west of Central have original brick chimneys on homes built before 1950, and those flues often need crown work, flashing repair, or their first liner replacement ever. Newer homes on the east side have factory-built systems that can fail at the cap or the metal flue joints after years of heat cycling. Chimney Repair means the same thing in both cases: find the actual problem with a camera, show you what we found, and fix the failing part instead of selling you work the chimney doesn’t need. In Fillmore’s mild climate, the biggest repair trigger is time, not weather. Bricks and mortar just sit there for decades until one good fire exposes what the idle years did to them.
Chimney Cap Installation
Signs you need it
Water staining on the firebox floor, rust on the damper, or a cap that’s missing entirely and leaves the flue open to rain, birds, and Fillmore’s wasps.
What it costs in Fillmore
Chimney cap installation in Fillmore typically runs $350 – $750 depending on the flue size and roof access.
How we do it
We measure the flue opening, match the cap material to the existing setup, seal the base to the flue tile or chase top, and test the fit before we leave the roof.
Chimney Flashing Repair
Signs you need it
Water rings on the ceiling near the chimney, damp brick at the roofline, or visible gaps where the metal flashing has pulled away from the masonry.
What it costs in Fillmore
Chimney flashing repair in Fillmore typically costs $500 – $1,200, with the spread driven by whether the sealant can be patched or the flashing needs replacing.
How we do it
We identify where water is actually entering, replace or reseal the flashing, and verify the repair with a water test before finishing the roof.
Chimney Crown Repair
Signs you need it
Cracks in the concrete crown on top of the chimney, spalling brick near the top, or water in the flue that isn’t coming from the flashing.
What it costs in Fillmore
Chimney crown repair in Fillmore usually runs $700 – $1,500 depending on whether the crown can be resurfaced or needs a full rebuild.
How we do it
We remove the deteriorated crown material, bond a new surface to the existing brick or rebuild from the top course of masonry, and slope it so water runs off the chimney rather than into it.
Chimney Liner Installation
Signs you need it
A failed liner, cracked clay tile visible in the camera report, or a fireplace that drafts poorly and leaks smoke even with a clean flue.
What it costs in Fillmore
Chimney liner installation in Fillmore typically lands between $2,500 and $6,000 depending on the flue length and whether the old liner must be removed first.
How we do it
We confirm the existing flue dimensions, pull a DuraFlex flexible liner through the chase, cap and seal the top and bottom, and verify draft before we pack up.
What Chimney Repair Costs in Fillmore
| Item | Typical range in Fillmore |
|---|---|
| Chimney cap installation | $350 – $750 |
| Chimney flashing repair | $500 – $1,200 |
| Chimney crown repair | $700 – $1,500 |
| Chimney liner installation | $2,500 – $6,000 |
Do I really need a new liner, or can it wait?
A cracked liner cannot be monitored away. It exposes combustible framing to flue gases and heat. The camera footage from your inspection shows exactly what we’re seeing, and if the liner is safe to leave another year, we say so plainly.
How long does chimney repair take in Fillmore?
Cap installation and crown repair are typically same-day jobs. Liner work usually runs one to two days. We book a written estimate first so you know the full scope and cost before any work starts. Call (833) 589-9263 to schedule the inspection.
Brands We Service in Fillmore
We install and repair what the industry actually uses, not whatever is on the shelf at a hardware store. That means Famco caps and venting components, DuraFlex flexible liners, Copperfield chimney products, and HeatShield resurfacing materials when a liner can be restored instead of replaced. We stock common parts for the chimney and venting systems we service, and most small repair jobs finish the same day. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Fillmore, CA
| Service | Typical range in Fillmore |
|---|---|
| Chimney sweep | $180 – $340 |
| Chimney cap installation | $350 – $750 |
| Chimney cap replacement | $300 – $600 |
| Chimney crown repair | $700 – $1,500 |
| Chimney flashing repair | $500 – $1,200 |
| Chimney liner installation | $2,500 – $6,000 |
| Dryer vent cleaning | $140 – $300 |
| Chimney repointing | $700 – $1,600 |
Fillmore prices shift with two things: roof access on the older two-story bungalows and whether a flue needs partial demolition before it can be relined. Every job starts with a free written estimate, so the number we quote is what you see before any work begins.
Neighborhoods We Serve in Fillmore
We work across Fillmore and the surrounding streets, from the historic blocks near downtown to the newer subdivisions on the east side. Response times in the area are typically same-day or next-day for service calls, depending on how many jobs are already on the board for that day.
- Downtown Fillmore
- Heritage Valley neighborhoods
- North Fillmore
- East Fillmore tract developments
- Bardsdale
Service Area – Cities Near Fillmore
We regularly take on jobs in the communities around Fillmore, including Moorpark, CA, Santa Paula, CA, and Simi Valley, CA. We also serve Santa Rosa Valley, CA and the smaller pockets in between. If you’re anywhere in the Santa Clara River Valley or just over the ridge, call us and we’ll tell you straight whether we can get a crew there this week.
Serving Fillmore, CA – Our Local Coverage Area
We serve Fillmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Fillmore
Most cap, crown, and flashing work does not require a permit because it doesn’t change the structure of the home. A full liner replacement can trigger permit requirements depending on the scope, and city building departments vary on this. We’ll tell you what the job needs before work begins.
We answer the phone 24/7. Dispatch runs from 7am to 7pm Sunday through Friday, and most Fillmore homes can be scheduled within a day or two depending on current volume. Call (833) 589-9263 and we’ll give you a straight answer on the next opening.
That’s the exact situation we see most in Fillmore’s older homes. The smart move is a camera inspection before the first fire. We remove any nests or debris, check the flue for cracks, and tell you whether it’s safe to burn. The estimate is free and the report is yours either way.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fillmore Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Ruben Torres"Older house, weird setup, previous owner did some creative things. He didn't sigh or roll his eyes, he just figured it out. Took him a while but he got there."
- Kevin Mercer"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Bethany Padgett